Blackdog Hybridscan Metal Detector
|Blackdog Hybridscan is for the professional metal detectorist including uses in Military, Law Enforcement, Archeology. It combines two technologies: Pulse Induction and Very Low Frequency, using military grade components, Superior depth with advanced features including “Auto-Track” automatic terrain tracking.
Blackdog X-Tream Pulse Induction Metal Detector
|– TECHNOLOGY – PI|
|– VARIABLE FREQUENCY 95 – 125Hz|
|– HEADPHONE CONNECTOR – 6.35mm|
|– BATTERY CHARGING CONNECTOR – 2,5mm|
|– COIL CONNECTOR – INDUSTRIAL TYPE|
|– BATTERY – LITHIUM ION 16.8V / 3400mA|
|– AUTONOMY – 20/40 HOURS|
|– CHARGING TIME – 3 HOURS|
|– MAXIMUM CONSUMPTION – 170mA|
|INTELLIGENT CHARGER -16.8V / 2A|
|MEASURES – 150X100X60mm|
|COIL – 1X1 FRAME or 13 × 13 inch Mono loop Coil|
|CARBON FIBER TELESCOPIC CRUTCH|
|DETECTION DETECTION – UP TO 8 METERS|
TX-BOOST: This control regulates the transmission pulse width. For searches in highly mineralized terrain, it is recommended to decrease the value, to avoid false signals.
FREQ: It means the frequency control, which can range between the values of 95Hz-125Hz. This control helps eliminate electrical interference, if searches are conducted near power lines or other sources of interference. For optimal frequency adjustment, with the help of the GAIN setting , we seek a slight threshold level.
VOLUME: The volume control of the device is used to regulate the intensity of the sound emitted by the speaker. This control does not affect the depth of the device at all.
GAIN: gain or sensitivity control of the device.
GROUND: With this setting we eliminate the effects of ground mineralization.
RESET: This button is used to reset the detector in the event of maladjustment. It is recommended to press it for 2-3 seconds after modifying any parameter of the detector.